10mm Dome Rivets - Ant/Brass - Pack of 10
Antique Brass - Pack of 10
Mushroom Dome – Screw Base - Sold in a pack of 10 Domes.
We’ve searched the globe for these little Mushroom Domes!
Our design specifications were fairly simple: the screw had to sit in as close as possible to the base of the dome, yet be long enough in its length to enable the end user to dictate the fabric thickness. They had to be easy to install – screw driver and hole punch only and most importantly had to look extraordinarily good!! Most pleasingly we can simply say - Found!!!
These guys can be used in so many places – decoration, accents on handles, use them as purse feet! – The external layer is double coated so they are hardy little numbers.
Super easy to install:
1: Create a hole for the shank to go through using your leather/hole punch – hole diameter should be slightly smaller than the diameter of the screw we recommend punch that is 2mm in diameter
2: Insert the screw through the hole
3: Add a smidge of glue on the tip of your screw (E6000, HT2, Tiger grip or other clear drying metal/fabric glue)
4. Place the dome on the top of the screw and settle in with a couple of hand turns, then flip over and use your Phillips head screwdriver to tighten it through. (Keep an eye out on our facebook page which will have a tutorial as well)
Dome Diameter = 10mm (3/8”)
Dome Depth = 5mm (13/64”)
Screw Diameter = 2.5mm (3/32")
Screw length = 4mm (5/32”)
Fabric Gap = will hold as thin as 1mm
Base Metal = Brass base which equals no rust!! Yay!!
(Please note the thickest coating is on the external dome area - the base area where the screw inserts is single plated over a brass base – some of the brass colour may be visible on the silver colours when the screw is removed - also note the Antique Bronze screw is silver in colour - hidden from view by the lining of your bag)
|Brand||Betty Box Pleat|
Be The First To Review This Product!
Help other Betty Box Pleat users shop smarter by writing reviews for products you have purchased.